Look Out!

A Scorpion Pop-up-card

 

 

 

"Scorpion Pop-up Card"

Something so intricate, from only

a couple of pieces of paper

 


Step-by-step instructions below
Time required: 4 minutes | Level: medium
More info about this card

How to Make this Card...

First print this page
Then cut-out the paper shapes below
And follow the steps lower down
You can also comment on this card

 

 

Congratulations on printing your cut-outs from PopThatCard.com

Remember to cut out the shapes on the next page carefully.
Please read the instructions and follow each step.
I have included pictures to make it easy for you...

If you have any trouble printing or making this card then please see
www.popthatcard.com/tips.htm

Have fun!

Ricko
 

 

The Cut-Outs...

Print out this page and carefully cut out the shapes

Make sure ALL of the images have appeared on this page before you print. If you have a slower dial-up connection this can take up to 40 seconds.

The steps...

These steps 1 to 6 show you how...Or watch the video below

 

 

 

 

Before you make this card please read the instructions below...

 

The Instructions...

 

Some advice on the steps pictured above:

  1. Carefully cut out the template including the card shape and the two scorpion pieces.
  1. Carefully fold along the dotted lines. Fold both ways so that the bends are flexible. Fold the card shape and open up again.
  1. Stick the scorpion body to the card. The markings should match up exactly. Don’t use too much glue – you only need a couple of drops.
     
  1. Stick the scorpion’s face (and claw) to its body.
  1. That’s it! Now carefully close the card. The scorpion will fold neatly inside.
  1. Congratulations. You're ready to POP! Open the card and LOOK OUT!
 (Also see pop-up-card making tips).

 

^BACK TO TOP